XRF Analyzers - Product Recovery - Air Monitoring - Soil Monitoring - Water Monitoring - Safety/Consumables
Well Completion - Rental Equipment & Repair - Online Store - Get a Quote - Company Info

Water Quality Testing Equipment > Conductivity Meter

Water Conductivity

HANNA INSTRUMENTS

HI9033 & HI9034

The HI 9033 or HI 9034 will satisfy all field application needs. All conductivity readings, from de-ionized water to brine, are performed through the rugged 4-ring potentiometric probe. Results are given in uS/cm in the HI 9033 and in TDS in the HI 9034.

What is a conductivity meter?

Water conductivity is tested by such a meter. Better to ask, what is water conductivity?
The conductivity of water is the measure of the water's ability to conduct electricity. Electricity is conducted through water by the dissolved solids in solution. The conductivity test requires a small electrical current transmitted between the poles of the conductivity meter's probe.

Conductivity is improved by higher temperature and higher dissolved solids of the solution. Conductivity and temperature are intimately related.

Automatic temperature control or compensation (ATC) is now the norm for modern conductivity meters such as those provided by the Hanna hi 9033 and hi 9034. Modern conductivity meters as the Hanna meters use automatic temperature control or compensation (ATC).

Conductivity units are presented in two forms, micro Siemens per centimeter, uS/cm, know as EC and total dissolved solids, mg/l known as TDS. Conductivity and TDS are directly proportional. That proportion is usually 1 uS/cm EC to 0.5 mg/l TDS.

Conductivity Meter Manual [PDF]

Hanna HI 9033 / HI 9034

Conductivity / TDS Multi-range EC / TDS Portable Meter

Automatic Temperature Control - ATC

Waterproof Housing

4-Ring Method Excels - The 4-ring potentiometric method is so technologically advanced that it renders the 2-ring Amperometric system obsolete.

Battery Error Preventive System - will never let you take erroneous readings caused by low batteries. BEPS shuts down the meter when the voltage is low

Warranty - Meter: 2 years. Probe: 6 Months

SPECIFICATIONS	HI 9033	HI 9034
Range	0.0 to 199.9 μS/cm; 0 to 1999 μS/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm	0.0 to 199.9 mg/L; 0 to 1999 mg/L; 0.00 to 19.99 g/L
Resolution	0.1 μS/cm; 1 μS/cm; 0.01 mS/cm; 0.1 mS/cm	0.1 mg/L; 1 mg/L; 0.01 g/L
Accuracy (@20°C/68°F)	±1% F.s. (excluding probe error)
Calibration	manual, one point
TDS Factor	—	0.5
Temperature Compensation	automatic, 10 to 50°C (50 to 122°F) with b = 2%/°C
Probe	Hi 76302W conductivity probe with internal temperature sensor, Din connector and 1 m (3.3') cable (included)
Battery Type / Life	9V / approximately 100 hours of continuous use
Environment	0 to 50°C (32 to 122°F); RH max 100%
Dimensions	185 x 72 x 36 mm (7.3 x 2.8 x 1.4'')
Weight	425 g (0.9 lbs.)

Other Conductivity Test Meters

Hanna pH/Conductivity Meter

Multi Parameter Horiba Conductivity U-50 Series

Multi-Parameter Water Quality Meter Hanna Hi 9828