| |
Water Quality Testing Equipment >Hanna HI9828 pH/ORP/EC/TDS/Temp/Salinity/DO |
 |
|
|
| |
Multi-Parameter Water Quality Meter Now with GPS |
| |
HI9828 Brochure pdf |
Hanna Hi 9828 manual pdf |
| |
HANNA INSTRUMENTS |
|
| |
HANNA’s new HI 9828 now includes GPS. Thisa multi parameter portable instrument monitors up to 13 different water quality parameters (6 measured, 7 calculated). The meter has a 128 x 64 pixel dot matrix backlit LCD that automatically sizes the digits and allows full configuration of each parameter measured, units and language selection, and on-screen graphing. Each parameter is fully supported by the on-screen context sensitive help both in the calibration mode and during measurement. Designed for outdoor environments, the meter is impact resistant and waterproof to IP67 standards (30 minutes immersion under 1 m of water). The multi sensor probe can be left underwater (IP68 standard). For field calibration, HANNA’s Quick Calibration allows the user to standardize pH, conductivity and oxygen with one solution. |
| |
|
| |
|
| |
Now with GPS (Global Positioning System) The new HI9828 features an internal 12 channel GPS receiver with built-in antenna. Allowing it to calculate its position to and add location points along with measurement data.
Basic GPS Features
- GPS coordinates shown on the LCD with up to 10 measurement parameters
- GPS signal strength shown on LCD
- Number of satellites shown on LCD
- Logged data is embedded with GPS coordinates
Advanced GPS Features
- Users can associate GPS coordinates with alphanumeric locations
- Distances between current location and predefined locations are displayed arranged by distance
- Memorizes last location and time should signal be lost
HI 929828 is the software for your PC that allows you to:
- Manage logged data w/GPS data displayed
- Automatic mapping of data on your computer (PC) screen (internet connection required)
- Displays data measurement and location on map
|
| |
|
Multi parameter Probe
HANNA’s HI 769828 multi parameter probe incorporates a built-in microprocessor and amplifiers that convert the high impedance signals from the sensors of the probe eliminating common problems associated with high impedance signals such as limitation of cable length and noise. This allows the probe to have reliable communication with the meter and the user is immediately warned of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available. |
| |
|