Solinst LTC Levelogger Junior Data logging Pressure Transducer w/conductivity

• Affordable
• Low Maintenance
• Descrete
• Compact
• Temp/Level and EC all in one

The New Solinst LTC Levelogger® Junior adds conductivity measuring to the economical datalogger by Solinst. Now you get level, temperature and conductivity logging down hole without having to leave expensive equipment in remote areas.

If you need more accuracy, sampling options, and range of water table movement, check out the Solinst LTC Levelogger Gold.

Specifications
	Level Sensor	Piezoresistive Silicon in 316L SS
	Ranges	F30/M10, F100/M30
	Accuracy (typical)	0.1% FS
	Resolution	0.08" (0.2 cm), 0.24" (0.6 cm)
	Normalization	Automatic Temp Compensation
	Temperature Senso	Platinum RTD
	Accuracy	± 0.1°C
	Resolution	0.1°C
	Temp Compensation Range	- 10°C to 40°C
	Conductivity Sensor	4-Electrode Platinum
	Full Range	0 - 80,000 ?S/cm Calibrated
	Range	500 µS/cm - 50,000 µS/cm
	Accuracy	2% of reading or 20 µS/cm
	Resolution	1 µS Temp
	Compensation Range	0°C to 40°C
	Normalization	Specific Conductance @ 25°C General
	Battery life	5 Years (5 minute sampling rate)
	Clock Accuracy	± 1 minute/year from 0 to 40°C Operating
	Temperature	- 20°C to 80°C
	Memory	Non-volatile EEPROM, FRAM back-up
	Maximum # Readings	16,000 sets of readings
	Communication	Optical Infra-Red to USB or RS232
	Size	7/8" x 7.5" (22 mm x 190 mm)
	Wetted Materials	Platinum, Stainless Steel, Delrin®, Viton®, Buna-N
	Sampling Mode	Linear, (5 sec to 99 hrs) SDI-12, Real Time View
	Barometric Compensation	Software Wizard and Barologger Gold