Solinst Levelogger

The Levelogger series by Solinst is a versitile line that allows for continuous water level, temperature and optionally conductivity, down a well without any electrical wire or hardware on the surface. They are fully self contained logging pressure transducers.

For realtime monitoring they can be used with direct read cables and will give live data.

Also see the:
Barologger Gold for barometric pressure compensation
Levelogger Junior for more affordable logging of water level
Levelogger Junior LTC adding Conductivity

Solinst Interface Meter

For determining the thickness of oil and gas floating on the water or sinking product. Gives audible and visual signal for both water and product. Therefore it can also be used as a water level indicator.

Model 107 TLC Meter

This WLM adds temperature and conductivity to its capabilities. Measuring temp and EC in the well makes the sampling easier and cleaner. No need to create waste water from samples brought to the surface to test. The Solinst TLC is a versatile instrument from a trusted name.

Solinst Inflatable Packers

Descrete zone sampling and isolating of sampling points in environmental monitoring wells and borings. Models foreither single unit or tandem stacked. Sample above, between or below.

New Solinst Model 103 Tag Line

The solinst model 103 tag line is now Laser Marked. Stranded Stainless Steel cable with polyethylene coating is marked every half a foot and supports at least 290 pounds of weight. Use it for total well depth, height of back-fill, lowering pumps, packers or samplers. Choice of 3/4" diameter or optional 1/2" diameter weight.

Comes on a sturdy reel that has a weight holder, brake and handle.

The solinst Model 464 Electronic Control Unit ia a state of the art bladder and double valve pump controller. It has pre-programed as well as programable settings for low-flow sampling and higher flow rate groundwater retrieval. Reliable flow of 100my/min or lower for VOC sampling.